|
MX HTS / NICO |
Description |
Limitation / Scope |
| 7601.10.02 | Unwrought non-alloy aluminum. | |
|
01 |
Aluminum ingots with a minimum aluminum purity of 99.7%, containing by weight: 0.010% to 0.025% boron, 0.04% to 0.08% silicon, and 0.13% to 0.18% iron, identifiable as intended for the manufacture of electrical conductors.
|
|
|
99 |
Other. | |
| 7601.20.02 | Aluminum alloys. | |
|
01 |
In any form, containing at least: 5% titanium and 1% boron; or 10% strontium, except — in both cases — products of circular cross-section with a diameter equal to or greater than 50 mm.
|
|
|
99 |
Other.
|
|
| 7604.10.01 | With a minimum purity of 99.5%, diameter equal to or greater than 9 mm, for the manufacture of electrical conductors. | |
|
00 |
With a minimum purity of 99.5%, diameter equal to or greater than 9 mm, for the manufacture of electrical conductors. | |
| 7604.10.02 | Profiles. | |
|
00 |
Profiles. | |
| 7604.10.99 | Other. | |
|
00 |
Other. | |
| 7604.21.01 | Hollow profiles. | |
|
00 |
Hollow profiles. | |
| 7604.29.01 | Aluminum bars containing by weight: 0.7% iron, silicon equal to or greater than 0.4% but not exceeding 0.8%, copper equal to or greater than 0.15% but not exceeding 0.40%, magnesium equal to or greater than 0.8% but not exceeding 1.2%, chromium equal to or greater than 0.04% but not exceeding 0.35%, in addition to other elements. | |
|
00 |
Aluminum bars containing by weight: 0.7% iron, silicon equal to or greater than 0.4% but not exceeding 0.8%, copper equal to or greater than 0.15% but not exceeding 0.40%, magnesium equal to or greater than 0.8% but not exceeding 1.2%, chromium equal to or greater than 0.04% but not exceeding 0.35%, in addition to other elements. | |
| 7604.29.02 | Profiles. | |
|
00 |
Profiles. | |
| 7604.29.99 | Other. | |
|
00 |
Other. | |
| 7605.11.01 | Aluminum wire with a purity equal to or greater than 99.5% and diameter equal to or greater than 9 mm, for the manufacture of electrical conductors. | |
|
00 |
Aluminum wire with a purity equal to or greater than 99.5% and diameter equal to or greater than 9 mm, for the manufacture of electrical conductors. | |
| 7605.11.99 |
Other.
|
|
|
00 |
Other.
|
|
| 7605.19.99 |
Other.
|
|
|
00 |
Other.
|
|
| 7605.21.01 | Containing by weight: 0.7% iron, silicon equal to or greater than 0.4% but not exceeding 0.8%, copper equal to or greater than 0.15% but not exceeding 0.40%, magnesium equal to or greater than 0.8% but not exceeding 1.2%, chromium equal to or greater than 0.04% but not exceeding 0.35%, in addition to other elements. | |
|
00 |
Containing by weight: 0.7% iron, silicon equal to or greater than 0.4% but not exceeding 0.8%, copper equal to or greater than 0.15% but not exceeding 0.40%, magnesium equal to or greater than 0.8% but not exceeding 1.2%, chromium equal to or greater than 0.04% but not exceeding 0.35%, in addition to other elements. | |
| 7605.21.02 | Alloy 5056. | |
|
00 |
Alloy 5056.
|
|
| 7605.21.99 | Other. | |
|
00 |
Other.
|
|
| 7605.29.01 |
Containing by weight: 0.7% iron, silicon equal to or greater than 0.4% but not exceeding 0.8%, copper equal to or greater than 0.15% but not exceeding 0.40%, magnesium equal to or greater than 0.8% but not exceeding 1.2%, chromium equal to or greater than 0.04% but not exceeding 0.35%, in addition to other elements.
|
|
|
00 |
Containing by weight: 0.7% iron, silicon equal to or greater than 0.4% but not exceeding 0.8%, copper equal to or greater than 0.15% but not exceeding 0.40%, magnesium equal to or greater than 0.8% but not exceeding 1.2%, chromium equal to or greater than 0.04% but not exceeding 0.35%, in addition to other elements. | |
| 7605.29.02 | Alloy A2011TD, in accordance with JIS-H-4040 standard, or equivalent specifications. | |
|
00 |
Alloy A2011TD, in accordance with JIS-H-4040 standard, or equivalent specifications. | |
| 7605.29.99 | Other. | |
|
00 |
Other. | |
| 7606.11.01 | Sheets, strips or plates in coils, with an aluminum content equal to or greater than 93%, tensile strength equal to or greater than 2,812 kg/cm² and elongation equal to or greater than 1% over 5 cm length, identifiable as exclusively intended for the manufacture of beverage or food containers. | |
|
00 |
Sheets, strips or plates in coils, with an aluminum content equal to or greater than 93%, tensile strength equal to or greater than 2,812 kg/cm² and elongation equal to or greater than 1% over 5 cm length, identifiable as exclusively intended for the manufacture of beverage or food containers. | |
| 7606.11.99 | Other. | |
|
00 |
Other. | |
| 7606.12.01 | Sheets, strips or plates in coils, with an aluminum content equal to or greater than 93%, tensile strength equal to or greater than 2,812 kg/cm² and elongation equal to or greater than 1% over 5 cm length, identifiable as exclusively intended for the manufacture of beverage or food containers. | |
|
00 |
Sheets, strips or plates in coils, with an aluminum content equal to or greater than 93%, tensile strength equal to or greater than 2,812 kg/cm² and elongation equal to or greater than 1% over 5 cm length, identifiable as exclusively intended for the manufacture of beverage or food containers. | |
| 7606.12.02 | Identifiable for aircraft fuselage applications. | |
|
00 |
Identifiable for aircraft fuselage applications. | |
| 7606.12.03 |
Anodized, in coils, except those classified under tariff item 7606.12.01.
|
|
|
00 |
Anodized, in coils, except those classified under tariff item 7606.12.01. | |
| 7606.12.99 | Other. | |
|
00 |
Other. | |
| 7606.91.01 | Identifiable for aircraft applications. | |
|
00 |
Identifiable for aircraft applications. | |
| 7606.91.99 | Other. | |
|
00 |
Other. | |
| 7606.92.01 | Identifiable for aircraft applications. | |
|
00 |
Identifiable for aircraft applications. | |
| 7606.92.99 | Other. | |
|
00 |
Other. | |
| 7607.11.01 |
Simply rolled.
|
|
|
00 |
Simply rolled. | |
| 7607.19.01 | Identifiable for aircraft applications. | |
|
00 |
Identifiable for aircraft applications. | |
| 7607.19.02 |
Surface-etched, identifiable for the manufacture of electrolytic capacitors.
|
|
|
00 |
Surface-etched, identifiable for the manufacture of electrolytic capacitors. | |
| 7607.19.03 | Of thickness equal to or less than 0.02 mm and width less than 20 mm, or thickness less than 0.006 mm in any width, in coils, identifiable as exclusively designed for electrical capacitors. | |
|
00 |
Of thickness equal to or less than 0.02 mm and width less than 20 mm, or thickness less than 0.006 mm in any width, in coils, identifiable as exclusively designed for electrical capacitors. | |
| 7607.19.99 | Other. | |
|
00 |
Other. | |
| 7607.20.02 | Backed. | |
|
00 |
Backed. | |
| 7608.10.03 | Coils. | |
|
00 |
Coils. | |
| 7608.10.99 | Other. | |
|
01 |
With an internal diameter equal to or less than 203.2 mm. | |
|
99 |
Other. | |
| 7608.20.01 | With an internal diameter equal to or less than 203.2 mm, except those classified under tariff items 7608.20.02 and 7608.20.03. | |
|
00 |
With an internal diameter equal to or less than 203.2 mm, except those classified under tariff items 7608.20.02 and 7608.20.03. | |
| 7608.20.02 | With an internal diameter equal to or less than 203.2 mm, including coupling devices and side discharge gates, identifiable as exclusively designed for surface agricultural irrigation systems. | |
|
00 |
With an internal diameter equal to or less than 203.2 mm, including coupling devices and side discharge gates, identifiable as exclusively designed for surface agricultural irrigation systems. | |
| 7608.20.03 |
Coils.
|
|
|
00 |
Coils. | |
| 7608.20.99 | Other. | |
|
00 |
Other. | |
| 7609.00.02 | Aluminum tube or pipe fittings (for example: couplings, elbows, sleeves). | |
|
01 |
Identifiable for aircraft applications. | |
|
99 |
Other. | |
| 7616.99.99 | Other. | Only: other cast parts or forged parts. |
|
91 |
Other cast parts.
|
|
|
92 |
Other forged parts. |
©Cuesta Campos
